Chimney Repointing
Removal and renewal of loose, cracked or weathered mortar joints across the chimney stack.
Prestige Roofing & Building Solutions Ltd
Chimney repairs in Greenwich.
Professional chimney pointing, lead flashing, brickwork repairs, flaunching and chimney roof-junction work for properties throughout Greenwich.
Chimney pointing
Weathered mortar repairs
Leadwork
Flashing and roof junctions
Free quotes
Clear repair recommendations
Greenwich chimney repair specialists
Protecting the chimney and surrounding roof.
Prestige Roofing & Building Solutions Ltd provides professional chimney repairs in Greenwich for properties with weathered mortar, damaged brickwork, failed lead flashing, cracked flaunching and water entry around the chimney stack.
A chimney is one of the most exposed parts of a building. It sits above the roofline where it faces wind, rain, frost and repeated temperature changes. Over time, mortar joints can weaken, bricks can become porous and leadwork may split or pull away from adjoining surfaces.
Chimney problems can also affect the roof around the stack. Water entering through failed flashing may travel beneath tiles or slates before becoming visible near a chimney breast, ceiling or upper wall. Therefore, a repair should consider the masonry and the roof-to-chimney junction together.
We assess the visible condition of the stack, pointing, flaunching, chimney pots, flashing and surrounding roof coverings before recommending suitable work. Where damage is limited, focused repair may be sufficient. More extensive deterioration may require wider repointing, brick replacement or renewal of the leadwork.
Our chimney repair services.
We repair the masonry, mortar and weatherproofing details that help protect the chimney stack and surrounding roof.
Lead Flashing Repairs
Repair or renewal of lead flashing where the chimney meets the tiled or slate roof covering.
Damaged Brickwork
Replacement of loose, fractured or heavily weathered chimney bricks where required.
Flaunching Repairs
Repair or renewal of the mortar bed around chimney pots to improve support and rainwater run-off.
Chimney Pot Work
Attention to damaged, loose or unsuitable chimney pots and the surrounding supporting mortar.
Leaking Chimneys
Investigation of water entry affecting the chimney stack, flashing, roof covering or surrounding junctions.
Roof Junction Repairs
Repairs to tiles, slates, underlay and weatherproof details immediately surrounding the chimney.
Storm Damage
Repairs following movement, impact damage or weather-related deterioration around the stack.
Chimney Maintenance
Preventative attention to ageing mortar, flashing and vulnerable masonry before wider damage develops.
Chimney repointing
Renewing weathered mortar to protect the stack.
Mortar and masonry repairs
Repointing a weathered chimney stack.
Mortar joints hold the chimney brickwork together while helping to resist rainwater penetration. Because the stack is exposed on every side, joints can deteriorate faster than sheltered masonry lower down the property.
Cracked or missing mortar allows water to enter between the bricks. During colder weather, trapped moisture can freeze and expand, placing further pressure on the surrounding mortar and brick faces. Continued deterioration may eventually leave sections of masonry loose or unstable.
Repointing involves removing unsuitable mortar to an appropriate depth before the joints are renewed. The replacement mortar should be suitable for the masonry and completed neatly so that water is less likely to remain within open joints.
Repointing alone may not resolve the problem if some bricks have already fractured or heavily weathered. Damaged units may need to be replaced so the repaired stack has a sound base for the new mortar.
- Cracked mortar joints
- Missing pointing
- Loose masonry
- Weathered brick faces
- Water penetration
- Frost-related damage
Lead flashing repairs
Protecting the junction between the chimney and roof.
Leaking chimney junctions
Repairing chimney leadwork and flashing.
Lead flashing creates a weatherproof junction where the chimney passes through the pitched roof. It directs rainwater away from the masonry and onto the surrounding tiles or slates.
Flashing may become damaged through age, movement, poor previous installation or impact. Sections can split, lift away from the masonry or become detached from joints. Mortar used to secure the flashing may also deteriorate.
Water entering around the chimney can move beneath the roof covering before appearing inside the property. A damp patch near the chimney breast does not automatically mean the masonry is the only source; the flashing, tiles, slates and underlay may all require attention.
Repairs may include renewing individual flashing sections, replacing stepped or cover flashing and restoring the surrounding roof covering. The chimney masonry should also be checked because sound leadwork cannot compensate for heavily deteriorated brickwork or open mortar joints above it.
Our chimney repairs in Greenwich consider the stack and roof junction together so that the recommended work addresses the likely source of water entry.
- Split lead flashing
- Lifted leadwork
- Failed mortar chases
- Leaks near chimney breasts
- Damaged surrounding tiles
- Roof junction repairs
Flaunching and chimney pots
Protecting and supporting the top of the stack.
Chimney top repairs
Flaunching, pots and exposed chimney details.
Flaunching is the shaped mortar around the base of chimney pots. It helps hold the pots in place and creates a surface that encourages rainwater to run away from the openings rather than collect at the top of the stack.
Over time, flaunching can crack, separate from the pots or begin to crumble. Water can then enter the top of the chimney stack and contribute to damp, frost damage and further masonry deterioration.
Damaged flaunching may be repaired locally where deterioration is limited, while more extensive failure may require removal and renewal. The condition and stability of the chimney pots should be checked at the same time.
A loose or fractured pot can create a safety concern and may expose the stack to additional water entry. Repairs should therefore consider the pot, flaunching and brickwork immediately below as one connected area.
Prestige Roofing & Building Solutions Ltd can assess these exposed chimney details and provide a clear quotation for the work required.
Our chimney repair process.
A straightforward process from the initial enquiry through to the completed chimney and roof-junction repairs.
Your Enquiry
Tell us about visible damage, damp, water entry or loose materials around the chimney.
Assessment
We consider the brickwork, pointing, flaunching, flashing and surrounding roof covering.
Clear Quotation
The proposed masonry, mortar or leadwork repairs are explained before work is arranged.
Professional Repair
The agreed work is completed with attention to stability, weatherproofing and neat finishing.
Why choose Prestige for chimney repairs?
Local coverage, complete chimney and roof-junction assessments and clear recommendations for Greenwich properties.
Greenwich Based
Our Trafalgar Road base places us close to homes throughout Greenwich and surrounding South East London.
Complete Assessment
We consider the chimney masonry and the surrounding roofing details rather than treating them separately.
Practical Repairs
Work is recommended according to the actual condition of the pointing, brickwork, flaunching and leadwork.
Free Quotations
Contact our team for a free, no-obligation quotation for chimney repairs in Greenwich.
Chimney repair questions answered.
Helpful information about pointing, brickwork, lead flashing, flaunching, leaking chimneys and quotations.
Do you provide chimney repairs in Greenwich?
Yes. Prestige Roofing & Building Solutions Ltd provides chimney repairs throughout Greenwich and nearby parts of South East London.
Can you repair leaking chimney flashing?
Yes. Damaged or failed lead flashing around the chimney and roof junction can be repaired or renewed where required.
Do you repoint chimney stacks?
Yes. Loose, cracked or weathered mortar joints can be removed and repointed using a suitable mortar.
Can damaged chimney bricks be replaced?
Yes. Damaged, loose or heavily weathered bricks can be replaced where necessary as part of the repair.
Can you repair chimney flaunching?
Yes. Cracked or deteriorated flaunching around chimney pots can be repaired or renewed where appropriate.
Why is water appearing near my chimney breast?
Possible causes include failed flashing, open mortar joints, damaged masonry, cracked flaunching or defects in the surrounding roof covering.
Can you repair the roof around the chimney?
Yes. Tiles, slates, underlay and other weatherproof details around the chimney can be repaired alongside the stack.
Do you provide free chimney repair quotations?
Yes. Call 07572 755346, email prestigeroofingandbuildingsolu@gmail.com or use the website form to request a free, no-obligation quotation.
Request a free quotation
Need chimney repairs in Greenwich?
Tell us about damaged pointing, loose brickwork, failed flashing, cracked flaunching or water entry near your chimney. Prestige Roofing & Building Solutions Ltd will provide practical advice on the next step.